86-572-2923382
No. 1, Senhe Road, Lianshi Industrial Park, Huzhou, Zhejiang, China (Mainland)
SRH home lift elevator features:
Standard Functions
VVVF drive | Motor rotating speed can be precisely adjusted to get smooth speed curve in lift start,travel and stop and gain the sound comfort. |
VVVF door operator | Motor rotating speed can be precisely adjusted to get the more gentle and sensitive door machine start/stop |
Automatic pass without stop | When the car is crowded with the passenger or the load is close to preset value,the car will automatically pass the calling landing in order to keep maimum travel efficiency |
Reopen with hall call | In the door shutting process,press reopen with hall call button can restart the door |
Express door closing | When the lift stops and opens the door, press door-shut button,the door will be closed immediately |
Car stops and door open | The lift decelerates and levels,the door only opens after the lift comes to a complete stop |
Car arrival gong | Arrival gong in the car top announces that the passengers arrive |
Photecell reptection | In the door open and shut period,infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects |
Overload holding stop | When the car is overload,the buzzer rings and stops the lift in the same floor |
Anti-stall timer protection | The lift stops operation due to slippery traction wire rope |
Start protection control | If the lift does not leave door zone within the designated time after it gets started,it will stop the operation |
Inspection operation | When the lift enters into inspection operation,the car travels at inching running |
Fault self-diagnosis | The controller can record 62 latest troubles so as to quickly remove the trouble and restore the lift operation |
Repeated door closing | If the lift can not close the door due to certain obstacle or interference, the lift will reopen or re-shut the door until sundries results in more safe and reliable lift travel |
Up/down over-run and final limit protection | The device can effectively prevent from the lift's surging to the top or knocking the bottom when it is out of control.It results in more safe and reliable lift travel |
Down over-speed protection device | When the lift downs 1.2 times higher than the rated speed, this device will automatically cut off control mains,stop the motor running so as to stop lift down at over-speed. If the lift continues to down at over-speed, and the speed is 1.4 times higher than rated speed, safety tongs act to force the lift stop in order to ensure the safety |
Upward over-speed protection device | When the lift up speed is 1.2 times higher than rated speed, the device will automatically decelerate or brake the lift |
Micro-touch button for car call and hall call | Novel micro-touch button is used for operation panel command button in the car and landing calling button |
Floor and direction indicatior inside car | The car shows the lift floor location and current travel direction |
Floor and direction indicator in hall | The landing shows the lift floor location and current travel direction |
Emergency car lighting | Emergency car lighting automatically activated once power failure |
Inching running | When the lift enters into emergency electric operation,the car travels at low speed inching running |
Fire emergency return | If you start key switch in main landing or monitor screen,all the callings will be cancelled.The lift directly and immediately drives to the designated rescue landing and automatically opens the door |
Car ventilation, light automatic shut off | If there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save the energy |
Remote shut-off | The lift can be called to main landing(after finishing the service) through the key switch and automatically exists the service |
Bell | In emergency conditions, if bell button above car operation panel is continuously pressed, electric bell rings on top of the car |
Hand-operated rescue at power failure | When sudden power failure happens to the elevator, or the elevator stops at none door zone, the repairer can enter into the host position through bottom floor inspection door. The rpairer releases the brake, hand-operates the jigger to operate the car to door opening zone, unlocks by triangle key and releases the passengers |
Optional Functions
Leveling when power failure | In normal power failure, the chargeable battery supplies the elevator power. The elevator drives to the nearest landing |
Voice announcer | When the elevator normally arrives, voice announcer informs the pasengers about the relevant information |
Operation box for the disabled | It is convenient for the wheelchair passengers and those who have visual disorder |
Camera function in the car | The camera is installed in the car to monitor the car conditions |
Construction sketch and Standard specifications of GRV20 Home elevator
SRH Factory Panorama
Salvagninl Production line
Factory view with 108m Testing tower (speed 8m/s)
The opening ceremony of annual output 4,000sets
SRH press conference about Safe new technology & reliability research platform
The opening ceremony of SRH Dr Scientific research working station
SRH Institute opening ceremony
Establishment of SRH R&D Center
Charitable donation
SRH CEO Mr Dongliu Li making speech at APEC